Herder-Fermex Stump Cutter SCE-800H
The SCE-800H is the largest stump cutter in this series. The SCE-800H is equipped with a cutting wheel with a diameter of 80cm (89 cm with teeth). This Herder-Fermex is equipped standardly with a mechanically adjustable hydraulic motor. That makes this stump cutter suitable for every hydraulic excavator with an oil flow between 80 and 160 l/min (max. 420 bar) and it can be used on most excavators between 10 and 20 tons.
Herder Stump Cutter SCE-800H Features:
- Largest stump cutter in this series.
- Suitable for all hydraulic excavators with oil flow between 80 and 160 l./min.
- Suitable for excavators between 10 and 30 tons.
- Cutting wheel with a diameter of 80 cm (89 cm with teeth).
- Comes standard with mechanically adjustable hydraulic motor.
- Maximum freedom of movement thanks to hydraulic drive.
| SCE-800H STUMP CUTTER | ||
| Required Volume Flow (l./min/) | 80 – 160 | |
| Max. Operating Pressure (bar) | 420 | |
| Number of Required Double Action Functions | 1 | |
| Safety | Overpressure Relief Valve | |
| Diameter Cutting Wheel (mm) | 800 | |
| Number of Teeth | 48 | |