Eddynet Front-mounted Hydraulic Sweeper
For loaders, backhoes and other equipment.
PH32-08A
Eddynet Sweeper Features:
- Own hydraulic unit.
- 16 gage hood covering 180° of the brush.
- The brush is driven by single hydraulic motor coupled directly to the core by a splined shaft.
- 32"Ø broom, polypropylene, wire or polypropylene/wire.
- Brush width: 8'
- Swing arm system allows the brush to follow ground variations.
- Pressure of the brush to the ground is adjustable by two springs.
- Brush is supported by two flange bearings.
- Anchor and lifting rings.
- 30° right / left hydraulic angle.
- 20hp Honda engine.
- Electric starter and 12 volts battery, 500 amperes and 20 amperes alternator.
- 30 gallons hydraulic tank and oil cooler.
- 15 gpm pump to supply the brush.
- 2 gpm pump for hydraulic angle.
- Oil level gage.
- Line diffuser, 10 microns filter.
- Remote control to start engine, sweep and angle.
- Hour meter.
- Epoxy primer and urethane paint.
Eddynet Sweeper Options:
- Adjustable dirt deflector.
- Female quick attach for loader.
- Quick attach female.
- Quick attach male.
- Additional remote control.
- Quick connect for the remote control.
- Turbo-filter.