Eddynet Rear Mounted Hydraulic Sweeper Attachment

For tractors and other equipment.

TH24-04 / TH24-05 / TH24-06 / TH24-07 / TH24-08 / TH24-09

Eddynet Sweeper Features:

  • Driven from equipment hydraulic system.
  • The brush is driven by single hydraulic motor coupled directly to the core by a splined shaft.
  • 24"Ø broom, polypropylene, wire or polypropylene/wire.
  • Brush width: 5', 6' or 7'.
  • 16 gage hood covering 180° of the brush.
  • Swing arm system allows the brush to follow ground variations.
  • Pressure of the brush to the ground is adjustable by two springs.
  • Brush is supported by two flange bearings.
  • Anchor and lifting rings.
  • Manual angle change 30° right and left.
  • 2 Jack stands for storage.
  • Epoxy primer and urethane paint.
  • 8' hydraulic hoses ¾"Ø with spool motor.
  • Weight 5': 281 kg or 618 lbs.
  • Weight 6': 305 kg or 671 lbs.
  • Weight 7': 345 kg or 761 lbs.

Necessary Features on Equipment:

  • Requires 12 gpm at 2000 PSI with a maximum of 25 gpm at 3000 PSI.
  • 1 remote valve to power the brush.
  • 3-point hitch, category 1.
Eddynet Rear Mounted Hydraulic Sweeper Attachment for tractors.

Eddynet Sweeper Options:

  • 50 gallons water tank, pump, plumbing, sprayers and mounting brackets on sweeper.
  • Adjustable dust deflector to reduce airborne dust.
  • Angle cylinder.
  • Solenoid diverter valve for angle if only 1 remote valve.
  • Two 10" diameter front caster wheels.
  • Two 16.5-6.5-8 front caster wheels (7' wide only).
  • Fast travel spring.

© 2024 Colvoy Equipment. All rights reserved.
Industrial vegetation management and snow removal equipment: mower sales, mower parts and rentals.
Roadside mowers, boom mowers,arm mowers, flail mowers, roadside vegetation management. Tiger, Bomford, Energreen, Spearhead, Votex, Herder, Truxor, Highline, Eddynet, Titan Leaf, Provonost, Metal Pless and Promac dealer.